Maintaining your corded vacuum | Corded vacuums | Dyson Community | Dyson Community
Visit Dyson.com Visit Dyson.com

Maintaining your corded vacuum

Keep your Dyson corded vacuum performing at its best. Post questions about machine maintenance here.

  • 41 Posts
  • 127 Replies

41 Posts

H
Harperkdz3New Member
asked in Maintaining your corded vacuum

Multifloor 2, no suction in hose

My Dyson Multi floor 2 works great on carpet and floors. I have absolutely no suction through the house when trying to use the attachments. I have taken the machine apart, cleaned the filters, removed blockages. Nothing hads worked. What else can I do?  

2
E
Gold Level Contributor
1 year ago
A
alexwilko94New Member
asked in Maintaining your corded vacuum

Dyson Upright Animal Small Ball Head not Spinning

Hi FolksI have a Dyson Animal Small Ball. The head does not spin. I press the relevant button and there is the slightest amount of movement and the accompanying noise (very briefly) but the brush bar does not spin. I have tried to "egg" it on, by manually rotating and pressing the button but it's not playing (small)ball.I've unhooked it and cannot see any obvious blockage or anything stopping the brush bar from spinning. I also don't think it's anything to do with the wiring because the head does "activate" for a second.Any help is very welcomed. (Moderation Edit - Tags Added)

6
DavidTaylor
1 year ago
J
jasonswainNew Member
asked in Maintaining your corded vacuum

DC50 retaining springs, please help!

Hi guys,I have a DC50 and recently tried to replace the changer hose. I got the old perished one out and the new one in ok, but can’t for the life of me remember how the springs go back on.I may have stretched them out of shape too.Can anyone point me in the direction of a tutorial or youtube video or the like with some instructions on how to get these back in? Alternately, maybe someone would post a photo of their DC50 with the springs shown clearly. Thanks in advance.

2
A
1 year ago
D
DIY123Novice Member
asked in Maintaining your corded vacuum

Retired Dyson DC15 Allergy - Where can I purchase parts?

Hi, I have a Dyson DC15 allergy (white ball), and it stopped working.I have checked all the wiring but found the armature of the main motor was covered with carbon (so no connection) and also the main carbon brushed were worn one more than other. So, I cleaned the armature, and the vacuum cleaner works now. I need to replace new brushes, but unable to find the brushes for DC15 on the internet. Also called Dyson and they were unable to help and did not want to give me the part number.Can anyone help where i could purchase a replacement brushed for the main motor and for the brush motor.  (Moderation edit - Category/Title updated)

4
D
1 year ago
M
Mark BNew Member
posted in Maintaining your corded vacuum

Dyson DC20 Animal - Turbine Head Attachment

HiOur DC20 Stowaway Turbine Head has become very rattly and inefficient. I took it apart but couldn’t see anything obviously wrong. As this model isn’t supported anymore I was wondering if anyone could please tell me what replacements there are that would work with my DC20 and is there also some sort of adapter I would need to get it to attach? The model number of the head is 906565-30 which I eventually found on the Dyson site. It’s out of stock (although there is one on ebay for £150 + £20 P&P!!!). I guess it’s been replaced by the new tangle free head for newer models.Thank you (Moderation Edit - Tags Added/Category Updated)

1
A
1 year ago
M
mcline06New Member
asked in Maintaining your corded vacuum

Upright vacuum cleaner - Ball Animal 2 - Brush Bar Not Spinning on one side (left, shorter side).

I’ve looked on several different sites and Youtube videos on what could be going on, but can’t quite seem to figure this out.  I’ve been able to remove the cleaner head, removed hair from brush, and cleaned the electrical sensors, but the left side of the brush bar still won’t spin when running.When it’s off, I’ve noticed the left side spins almost too easily.  When compared to the right side, which works properly and has a “tighter” spin to it when spinning manually while off, the left side just spins around too easily almost as if it’s not attached properly.  Not sure how else to explain it really but I’ve tried everything I can find and it’s still not working.  The one step I couldn’t complete was removing the brush bar entirely.  According the directions I found a T10 torx should work to remove the 4 screws still holding the brush on, but I couldn’t get those off even with a T10.  Kinda stuck (no pun intended). (Moderation Edit - Tags Added/Title Updated)

1
A
1 year ago
P
Priscilla FRookie Member
asked in Maintaining your corded vacuum

Corded Barrel - Unable to remove the bin - Help

Barrel in vacuum cleaner is stuck - can't empty - any advice please?  See photos.  Yellow arrow pull down lever doesn't sem to do the job(Edited by Moderator - Tags Added, Title Amended) 

3
P
1 year ago
F
fazNew Member
posted in Maintaining your corded vacuum

Dyson Ball Animal Pro+ - Brush bar help

I’ve been very happy with how well the vacuum works but there’s some definite design issues that need attention.After a few uses I do the needful of cleaning the brush bar of little bits of string and hair that build up. This is the standard process documented in the user manual. Fast forward a few years and the beater bar stopped working. I did not see any hair on the beater bar but it did not even move. Still under warranty, I brought to a store for inspection. The tech came out 10 min later with a brand new head and then showed me the inside of the old head. It was super clogged inside the head with hair. The only way to get into the head is to remove screws; pull out the brush bar(s).Since I want my head to live longer I go through this process of dismantling the head to pull out all the hair (got two women in the house with long hair) about once a month. It’s just really infuriating that a device called “Animal” can’t deal with hair plugging up the insides. And yes, there’s always

1
Dyson Community Moderator
Community Moderator
1 year ago
G
Gold Level Contributor
GraceWoodGold Level Contributor
asked in Maintaining your corded vacuum

Dyson Ball - Suction stuck on hose

Hi,My fathers dc24 ball animal only has suction from the hose instead of the floor head. Does anyone know if this can be fixed or do I need to have it repaired? Thank you.

6
A
1 year ago
J
JohnWRookie Member
posted in Maintaining your corded vacuum

Upright Vacuum DC14 clutch VERY noisy - RATTLES

Recently fitted a new Clutch assembly to my DC14 Animal and disappointed to find that when engaged makes a loud and annoying 'rattling' ...... any thoughts? (Edited by moderator – Tags added/Moved to a new category)

3
Stuart
Dyson Community Manager
1 year ago
T
ThemNew Member
asked in Maintaining your corded vacuum

Brush bar - Not loosening pet hair

How do I get replacement bristles for my brush bar? I have an upright corded model cleaner which wasn’t a problem with my late Springer Spaniel however my new one has a different coat and on various carpets  the cleaner rolls hair into a ball and it stays there after the brush head has gone over, it doesn't make any difference whether the brush bar is being powered or if the front suction bar is down I can only suspect that the bristles have worn and need replacing. I can't find them on the spares list! (Edited by moderator – Tags added) 

1
A
1 year ago
C
ChrislasNovice Member
posted in Maintaining your corded vacuum

Servicing my Dyson

HiI have an old DC19 vacuum cleaner. It’s working fine but I think after 10-15 yrs plus it could do with a service. Why buy a new one when this one works fine? The thing is that I don’t think Dyson offer a resonantly priced service (which I consider should be c £50). My neighbours have taken out insurance which entitles them to a service apparently. I just want to be sure of what options are available. I live in Guildford, Surrey. Any help / advice welcome.  thxChris  (Edited by moderator – Tags added) 

5
Stuart
Dyson Community Manager
1 year ago
F
FDMaguireNovice Member
posted in Maintaining your corded vacuum

Insight - Lifespan of washable filters

I own a Dyson DC14 Animal.  It has been great for our family and worked for a long time.It obviously comes with the washable filter that is separate from the HEPA filter that it also contains.I was curious on what are people’s different estimates for the lifespan of these pre-motor filters.  For mine, it sits on top of the canister.  I realize that we should wash them by directions at a period of once every month to once every six months depending on the degree of usage of the vacuum.I am not talking about how often we should wash them.  I am talking about what are people’s rough estimates on how long they would last until they need to be replaced.  I guess we actually have to look at two items here because there is a screen in the plastic insert that the washable filter goes into which I know can clog over time as well.Thanks for the help! (Edited by moderator – Tags added and Title amended) 

10
F
1 year ago
J
JerryKRookie Member
asked in Maintaining your corded vacuum

beater bar not spinning

Beater bar not spinning on my animal upright 

3
Dyson Community Moderator
Community Moderator
1 year ago
M
MykeDysun22New Member
asked in Maintaining your corded vacuum

Dyson DC24 Multi Floor Upright Vacuum Cleaner - missing part?

Hello! I need some help, please.I’ve cleaned the Cleaner Head on my DC24 a few times.After the most recent cleaning, the vacuum sounds ‘off’ and and feels harder to push along the floor.I’m worried there is a part missing, specifically a red plastic part (that would sit just below the yellow ball wheel assembly). I’ve looked at various product photos online and so far found them inconclusive.If you have this product, kindly check out the photo of mine below and let me know if it looks ok. (Edited by moderator – Tag added) 

1
A
1 year ago
E
Gold Level Contributor
Emma.SGold Level Contributor
asked in Maintaining your corded vacuum

DC 25 ball filter clicking

Hi, I brought a secondhand dc25 at the beginning of June. After doing my first filter wash, the ball filter keeps clicking and popping out. Is it broken? 

3
E
Gold Level Contributor
1 year ago
Terms & ConditionsCookie settings