Corded vacuums | Dyson Community | Dyson Community
Visit Dyson.com Visit Dyson.com

Corded vacuums

Dyson Upright and Cylinder vacuums

194 Posts

L
Llion1981Rookie Member
asked in General discussion

Dyson Upright - Wand coming away from handle - Suggestions?

New animal ball multi floor corded. Just setting it up. Everything seems to click into place. However, when manoeuvring the vacuum backwards.  

3
A
1 year ago
S
SteveNew Member
asked in Using your corded vacuum

Dyson DC41 Animal - Burning smell

Hi all - my upright started to emit burning smell from brush bar and the bar itself stops Turning after short time - I have removed both sides of bar to clean them but still same issue - any other thoughts ? 

3
A
1 year ago
J
jotsuiNovice Member
posted in General discussion

DC20 broken contact head replacement 904486-20

I am not having any luck finding a replacement contact head for my DC20 stowaway and the machine works perfectly well having replaced a few other parts. Can anyone help me with finding a replacement as i am reluctant to dispose of a perfectly working vacuum cleaner.

6
Dyson Community Moderator
Community Moderator
1 year ago
C
ConniedRookie Member
asked in General discussion

DC Allergy stowaway Main Head replacement - Where to purchase?

Does anyone know where to source the main head of the Dyson DC20 Allery Stowaway ?Appreciate any help in locating one thanks 

3
A
1 year ago
B
Barney50New Member
asked in General discussion

DC19 Dust is collecting at the filter and not going to the bin

Have replaced the filter but when in use all the dust and debris is collecting at the filter and it soon loses suction.

1
Y
1 year ago
Y
yingNew Member
asked in Maintaining your corded vacuum

How to clean the Dyson Cinetic™ Big Ball Origin

Hi team:Pls give me the guide how to clean the Dyson Cinetic™ Big Ball OriginAnd I have clean the filter ball by water directly , and it’s not easy to dry and have a little bad smell, If I can’t wash the filter by water , how can I clean it ?thx

2
A
1 year ago
S
SusanRookie Member
asked in Using your corded vacuum

Dyson Upright Animal 3 set up - Help connecting the clean head

I can’t get the head to attach to the body of my new Animal 3. All the instructions say it clicks in place, but mine is not lining up. Help!

3
S
1 year ago
V
Vac2023Novice Member
asked in General discussion

Sulphur Smell - Vacuum issue

Hi, does anyone have any suggestions of what would suddenly be causing a strong sulphur/electrical fire type of smell in a Dyson DC54 vac? Thanks

8
A
1 year ago
W
WFDNew Member
asked in Maintaining your corded vacuum

Dyson Stowaway - Trouble removing the brush

Dyson Stowaway, the vacuum head is on the end of the vacuum hose. Not obvious how to remove and replace the brush. Have removed the grille and see two torx screws on sides of the center ring, but it doesn’t look like removing those will enable removing the brush.  Besides, the ends of the brush are captured in sockets at each side of the vacuum head and no evident way to pull those side walls out to free the brush.   

3
A
1 year ago
V
vahawkeyeNew Member
asked in Maintaining your corded vacuum

Dyson DC25 brush motor not spinning - Any advice on repairing?

My 9 year old Dyson Ball DC25 brush motor is not spinning.  The brush quit spinning as a hair ball was stuck on it.   I removed the brush and removed/cleaned per the steps listed on Dyson’s site.  Reassemble the brush and pressed the power button and the brush was not spinning.  I pressed the reset brush button next to the power button and it still not spinning. What are the failure/break points that might have the issue that I can check next?  Switch? Relay? brush motor?  Please advise. 

2
A
1 year ago
S
SJFRookie Member
posted in General discussion

Dyson DC25 Tool Clip - Fitting

Hi, I don’t even know what this part is called, but in the holder for the brush head on the side of my DC25 Animal, there is a spring clip of sorts to hold it in place. I accidentally popped it out and I can’t work out how it fits back in! I’ve attached some photos and is someone could enlighten me I’d be most grateful. I’ve attached photos.(Moderation Edit - Tags Added/Converted to Conversation)

5
A
1 year ago
SKK
SKKNew Member
asked in Using your corded vacuum

Dyson Light Ball - Suction issue on carpet. What can I do?

My light ball corded vacuum won’t work on my carpet (which is precisely what I bought this vacuum to do - vacuum carpet). The suction is too strong and I can’t push it forward.What do I do? (Moderation Edit - Tags Added/Category Updated)

2
A
1 year ago
A
AnyssaNew Member
asked in General discussion

Hair straightener charging issues - Out of Warranty Repair

My straightener can’t keep a charge. It shuts off on hybrid mode after 45 sec despite being fully charged. When the cord is attached, it will stay on for the same amount of time, then turn back on, heat up again, and the cycle will continue. The time it works has continued to become less and less. I purchased the item 3 yrs ago, but it’s been giving me these issues for the past year. I finally called today, and was initially told I would have to drive it into a service center, even if it was under warranty, for it to be looked at bc it is likely the motor. I called back, and was told they only will receive the item by mail if under warrantee, otherwise you need to physically take the item to a service center for it to be assessed. Needless to say, I don’t live nearby - I live 6 hrs away. So I was basically told I can’t have the item fixed. This makes no sense to me. Online it says to call customer service for info on where to send items that aren’t working. Has anyone else been told yo

3
A
1 year ago
U
user19New Member
asked in Using your corded vacuum

Dyson Cylinder - Is there an adapter to use different cleaner heads / brushes?

Hello together, first of all i hope you understand my problem/questtion :) Since i am not an native english speaker, I prbably dont use allways the exact terms. I own an old Dysen, DC08 which i really like. Unfortunately, the cleaner head in worn, so I cant use the origianl one anymore. But i got two other cleaner heads from a newer version (think it is DC29) and from an even older version (DCxx). Are there adapters, so I can use for example the cleaner head form DC29 with my cleaner DC08?Thanks in advance for every answerThomas

2
E
Gold Level Contributor
1 year ago
R
Retro.51New Member
asked in Using your corded vacuum

Problem with dust leakage - Dyson Small Ball Vacuum Cleaner

My Dyson Upright Small Ball Vacuum Cleaner is leaving lines of dust at the edge. Has anyone else had this problem? 

2
E
Gold Level Contributor
1 year ago
K
kbigheadsamNew Member
asked in General discussion

Tracking - How do I locate my vacuum order?

i had an issue with my dyson ball2, which is still under warranty.  i called Dyson and they made it very easy to return my unit by dropping it off for Pack and Ship service at the UPS store.  my unit was delivered a couple of days later to Dyson, and on March 3rd i got an email that my repair was completed, and it was on its way back to me… they even gave me the tracking number to follow the return..  it has been all downhill from there.  it has been 7 days, and i still dont have my vacuum back!  the tracking number they gave me still says “ a shipping label has been created”…  no progress on the return.  Calling customer service is a joke, they refuse to give me an answer as to where my vacuum even is…  telling me they understand my frustration is even MORE FRUSTRATING!   just tell me where my unit is….  I can tell you, this is the last Dyson product i will ever purchase…  im heading to the store right now to buy a replacement… the service center can keep my Dyson!   😡

2
Dyson Community Moderator
Community Moderator
1 year ago
D
david clancyNew Member
asked in General discussion

Dyson DC50 replacement motor head.

Hi, we have a DC50 animal ball upright. The brushes will not spin so I assume the motor may be at fault.I have had a look online and seen a complect head replacement for sale. I need to check that this will fit our appliance. The picture of the head looks a little different than the one on ours. We moved over to New Zealand a few years ago, so my question is will this one fit. Photos attached. Thanks.replacement head old head(Moderation Edit - Tags Added) 

3
S
Gold Level Contributor
1 year ago
T
ticagrumpyRookie Member
asked in Using your corded vacuum

DC40 Extension Hose WANTED

Dyson dc40I’m looking for an accessory hose to put on the wand as a tool. I do not need a replacement hose.The wand is very unwieldy and I have to hoist it over my shoulder to use the cleaning tools. A hose that attaches to the tool end of the wand may solve that problem. Or a hose from another model that may serve the purpose.Elizabeth JonesSt George, Utah (Moderation edit - Sensitive data removed/Tags Added)

3
T
1 year ago
F
FinelsNovice Member
asked in General discussion

DC33 - Dust collection in the Dust Bin

Wondering why all the dust etc, accumulates up one side of the dust bin?  (Moderation Edit - Tags added/Moved to new Category)

12
Dyson Community Moderator
Community Moderator
1 year ago
S
SessillyNew Member
asked in Using your corded vacuum

Filter light even with a replacement filter. V10. Help!

The filter light on my vacuum kept flashing, so I ordered a new filter - it’s an Amazon knock off, but all the reviews said that it worked just fine. I just put it in and the same thing is happening… My vacuum also appears to not really be sucking anything up, Everything seems to be blowing out of and around it - I got it about a year ago but I don’t use it that much so I don’t think I could’ve broke it. I don’t know what to do!

2
E
Gold Level Contributor
1 year ago
C
clarebyrne84Rookie Member
posted in Maintaining your corded vacuum

Corded Vacuum - Triggerhead - Help with purchasing

Hi, my triggerhead for my DC39 does not work. I contacted dyson via what’s app in dec 2022. After long winded conversation I was told it was out of stock. Click notify me online. That option was not available so I took screen shot and sent back. I got no reply after that. Now it’s 2nd feb 2023 and I contacted dyson via telephone. Getting the same response. Not In stock and they cannot tell me when it wil be in. Same again no notify option on the trigger head again today. I am beyond frustrated. My next Hoover purchase certainly will not be a dyson based on after service. It would be so much easier to buy spare parts in local shops that sell dyson anyway (Moderation Edit - Tags Added)

3
A
1 year ago
D
D JarmanRookie Member
asked in General discussion

DC39 - Replacement Motor (where to buy)

The motor on my DC39 has burnt out and I want to replace it. The part number is YDK YV-16K24FA 2J10 but the only motors I can find so far have the part number YDK YV-16K23FA 9CS15. Will that model work in my DC39 satisfactorily, or can anyone recommend a source of the correct model? I live in France so an EU source would be preferable, but a UK source would be feasible.

3
R
1 year ago
R
Ringyou9New Member
asked in Using your corded vacuum

Dyson Ball

I have had enough problems with this Dyson Ball… 1st you CANNOT vacuum any carpets with it, 2nd now the brush will not work… I am very disappointed with this vacuum… Was told there is nothing better than a Dyson… I’m sorry i paid over $300 for this pile… Won’t buy another...

1
Dyson Community Moderator
Community Moderator
1 year ago
C
Cecet1107New Member
asked in General discussion

Dc17 cleaning wand - Where to buy replacements

I have a dc17 animal vacuum I purvis many years ago that is still working great,  the only problem is the red tip on the cleaning wand has gone missing.  Any ideas on how to using my tools with the cleaning wand or where I can find such a specific part?

2
A
1 year ago
H
Harperkdz3New Member
asked in Maintaining your corded vacuum

Multifloor 2, no suction in hose

My Dyson Multi floor 2 works great on carpet and floors. I have absolutely no suction through the house when trying to use the attachments. I have taken the machine apart, cleaned the filters, removed blockages. Nothing hads worked. What else can I do?  

2
E
Gold Level Contributor
1 year ago
Terms & ConditionsCookie settings