Fan won’t go below 33 degrees. Needs to be at 32 degrees for cooling. Is there a way to reset the device?
(Edited by Moderator - Tags Added, Title Amended)
Solved
Dyson AM09 Fan - Cooling mode
Best answer by Anonymous
To start cooling, you’ll need to select the blue button on the remote. Increasing the fan speed.
Dropping the fan speed down in the heating, will only switch the heat off (where it’s below the local temperature), increasing it will switch it back on.
I took the below image from their user manual - https://www.dyson.co.uk/support/air-treatment/fan-heaters/am09.
Jay
Have you read Why isn't my Dyson fan/purifier cooling my room down? | Dyson Community?
“”
They aren't designed to lower the room temperature - they cool you, not the room. The cooling effect comes when the smooth stream of air is projected from the amplifier, and passes over your skin. This is called ‘Wind Chill’.
Kirby.
It is AM09. Older model, the temperature reading on the device for cool air has to be 32 degrees otherwise it will not blow cool air.
If you’ve set it to AUTO or have it in heat, switch these off. It will then start blowing cool air.
To start cooling, you’ll need to select the blue button on the remote. Increasing the fan speed.
Dropping the fan speed down in the heating, will only switch the heat off (where it’s below the local temperature), increasing it will switch it back on.
I took the below image from their user manual - https://www.dyson.co.uk/support/air-treatment/fan-heaters/am09.
Jay
1 person likes this
Reply
Create a Community account to start contributing.
New here? Register below. To activate you account and be able to post on the community, don't forget to click on the link in your activation email.
Login to the community
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.